Act Net Network Details - Carrier VAV Zone II Installation And Startup Manual

To adjust the driver properties

Act Net Network Details

Act Net Statistics
The actuator serial numbers are automatically read and filled in by the i-Vu® application. Only those devices that
are physically connected or in the control program will show in the table.
NOTE See To get the Carrier VAV Zone II serial number (page 66) for the controller serial number.
The Act Net network shows the VAV Zone II's actuator has Address 1.
CAUTION If you see Duplicate address on network or No communication with device under Device Status,
contact Carrier Control Systems Support. Do not use Act Net Address Setting unless directed by Carrier Control
Systems Support.
VAV Zone II Controllers
Installation and Start-up Guide
64
CARRIER CORPORATION ©2019
All rights reserved