Appendix C: Zs Sensor Display For Vav Zone Ii - Carrier VAV Zone II Installation And Startup Manual

Appendix C: ZS Sensor display for VAV Zone II

Appendix C: ZS Sensor display for VAV Zone II
Property
Active Alarms
Active Maintenance
Active Air Source Linkage
Mode
Supply Air Temp
Air Flow Percentage of
Nominal
Outdoor Air Temperature
1 Rnet text is the scrolling text that appears on the ZS Pro Sensor's display.
NOTES

To view properties on the Diagnostic Screen, hold the
information to help troubleshoot your system.

The Rnet tag is displayed on the ZS sensor display.

To view properties on the Info Screen, press the
VAV Zone II Controllers
Installation and Start-up Guide
ZS Screen Rnet Tag
Diagnostic 1550
Diagnostic 1551
Diagnostic 1552
Info 304
Info 308
Info
F°
button. Tap the button to cycle through information.
100
Description
Rnet Text 1
-nonE No Active Alarms
StP-AL Zone Temp Alarm
SPco2-AL Zone CO2 Alarm
SP_rH-AL Zone Humidity Alarm
Sat-AL Supply Air Temp Alarm
-nonE- No Active Maintenance
SnSr-FLt Sensor Fault
Fltr-dtY Dirty Filter
Llnc-FLt Linkage Fault
OFF Off
hEAt-uP Warm-up
hEAt Heat
cooL Cool
FrEEcool Freecool
PrESSrZE Pressurize
EuAcuATE Evacuate
vEnt Vent
no-Llnc Linkage Not Active
Air Source Supply Air
Temp, if available
% of design air flow
Outside Air Temp
button for 3 seconds. Tap the button to cycle through
CARRIER CORPORATION ©2019
All rights reserved