Act Net Network Details - Carrier VVT Bypass II Installation And Startup Manual

To adjust the driver properties

Act Net Network Details

Act Net Statistics
The actuator serial numbers are automatically read and filled in by the i-Vu® application. Only those devices
that are physically connected or in the control program will show in the table.
NOTE See To get the Carrier VVT Bypass II serial number (page 36) for the controller serial number.
The Act Net network shows the VVT Bypass II's actuator has Address 1.
CAUTION If you see Duplicate address on network or No communication with device under Device
Status, contact Carrier Control Systems Support. Do not use Act Net Address Setting unless directed by
Carrier Control Systems Support.
VVT Bypass II Controller
Installation and Start-up Guide
34
CARRIER CORPORATION ©2019
All rights reserved