Table of Contents
Advertisement
Act Net Network Details
Act Net Statistics
The actuator serial numbers are automatically read and filled in by the i-Vu® application. Only those devices that
are physically connected or in the control program will show in the table.
NOTE See To get the Carrier Zone Ctrl II serial number (page 44) for the controller serial number.
The Act Net network can have the 3 devices listed below with the following addresses:
Address 1: The Zone Ctrl II's actuator
Address 2: A VAV Zone II Secondary Duct's actuator
Address 3: A VAV Zone II Secondary Duct's sensor
CAUTION If you see Duplicate address on network or No communication with device under Device Status,
contact Carrier Control Systems Support. Do not use Act Net Address Setting unless directed by Carrier Control
Systems Support.
Zone Ctrl II and
VAV Zone II Secondary Duct Installation and Start-up Guide
Error! No text of specified style in document.
41
To set up the driver
CARRIER CORPORATION ©2019
All rights reserved
Advertisement
Table of Contents
