Main Menu Overview (Setup) - FARMSCAN Jackal v2 General Description Manual

MAIN MENU OVERVIEW (SETUP)

This manual will guide you through two (2) setup scenarios.
a. Wizard Setup
b. Manual Setup
Wizard
Allows the user to run a predefined wizard for setting up common task
Area/Speed Wheel, Area/Speed GPS, TachoMeter, FlowMeter, Slippage Meter & Generic
Wizard for fast setup.
Inputs
Allows the user to select the ports in which sensors are connected to.
A choice of 13 inputs are available
Front Screen
Allows the user to enable/define/move/edit up to 14 line items on the front screen
You can also name the input port, select the number of decimal places displayed & edit the
alarms
Other
Allows the user to set in implement width (m), External run/hold options & alarm
Settings
notification settings as well as language control.
Output
Allows the user to select output options from the Jackal.
Output as a frequency / pulse (radar), external audible/visual alarm, batch/trip function,
other external function if required.
GPS/Serial
When an external GPS is connected the user can view & ensure the gps is setup correctly.
Setup baud rate & confirm GPS messages (NMEA messages RMC or GGA+VTG are required)
Latitude, Longitude, heading, speed, date & time
About Jackal
Shows current version of Jackal software installed on the unit
Factory Reset
Returns the Jackal to factory default.
off and back on before attempting to setup again.
September 2015
Use the NAV button to reveal further menu information (as below)
www.farmscanag.com
Main Menu Overview (Setup)
All settings & options are cleared. Please turn power
13
AM-JACKAL-3