FARMSCAN Jackal v2 General Description Manual page 43

42 Front Screen (Manual Setup)
FRONT SCREEN ORDER (MANUAL SETUP)
At any stage you can re order the lines on the front screen. For example – you may want to have Shaft 1 on the top
nd rd th
line, shaft 2 on the 2 line & Area on the 3 line, Speed on the 4 Line etc.
FRONT SCREEN > SETUP > FRONT SCREEN > ORDER
Example 3UP (3 Inputs) To re order. Navigate to SETUP > FRONT SCREEN
Line 1 – HA, Line 2 – Speed, Line 3 – Shaft 1
Highlight the line you wish to move & press ORDER. Using the NAV buttons, move the input to the desired line
It will now place a " * " in front of the line. & select PLACE.
(like above)
When you now EXIT back to the front screen the order of lines have been changed
Line 1 – HA, Line 2 – Shaft 1, Line 3 – Shaft 2
NB : Using the NAV buttons or PAGE button will allow you to view other activated ports and their information
September 2015 www.farmscanag.com AM-JACKAL-3