FARMSCAN Jackal v2 General Description Manual page 33

32 Rate Monitor
SETUP (KG/HA)
Follow the setup guide on
o Suggested setup on Input B2-B6
Follow the setup guide on
o Suggested setup on Input B2-B6
From the front screen press
SETUP
Press the UP NAV button &
Highlight IN1 & press EDIT to
change the Input X to where
the METERING Sensor is
connected.
i.e. 3 (Input 3)
September 2015
PAGES 15-19 for "Speed/Area Meter setup"
PAGES 28-29 for "Rate Meter Setup"
Highlight FRONT SCREEN &
press SELECT
Press the DOWN NAV button
& highlight IN2 & press EDIT
to change the Input X to
where the WHEEL sensor is
connected. i.e. (Input 2)
THIS ENDS THE SETUP FOR RATE METER SETUP AS kg/Ha
www.farmscanag.com
Highlight the line in which
the Metering sensor is
connected to.
e.g. 3: Input#3 kg
Press EDIT
Press EXIT twice (2) again to
return to the front screen.
Jackal will now display the
flow rate as kg/Ha with Area
& Speed
Highlight the UNIT & press
EDIT to change the unit to
kg/Ha.
AM-JACKAL-3