Table of Contents
Advertisement
MAIN MENU (SETUP OVERVIEW)
Below is a generic overview of the main menu.
The manual will guide you through two (2) setup scenarios.
a. Wizard Setup
b. Manual Setup
Wizard
Allows the user to run a predefined wizard for setting up common task
Area/Speed Wheel, Area/Speed GPS, TachoMeter, FlowMeter, Slippage Meter & Generic
Wizard for fast setup.
Inputs
Allows the user to select the ports in which sensors are connected to.
A choice of 13 inputs are available
Front Screen
Allows the user to enable/define/move/edit up to 13 line items on the front screen
You can also name the input port, select the number of decimal places displayed & edit the
alarms
Other
Allows the user to set in implement width (m), External run/hold options & alarm
notification
Output
Allows the user to select output options from the Jackal.
Output as a frequency / pulse (radar), external audible/visual alarm, batch/trip function,
other external function if required.
GPS/Serial
When an external gps is connected the user can view & ensure the gps is setup correctly.
Setup baud rate & confirm gps messages (NMEA messages RMC or GGA+VTG are required)
Latitude, Longitude, heading, speed, date & time
About Jackal
Shows current version of Jackal software installed on the unit
Factory Reset
Returns the Jackal to factory default. All settings & options cleared
AM-Jackal-2
FRONT SCREEN > SETUP
Settings
options
more quick guides @ www.farmscanag.com/jackal
Main Menu (Setup Overview)
July 2013
7
Advertisement
Table of Contents
