Installation - FARMSCAN Jackal v2 General Description Manual

INSTALLATION

PARTS LIST
Not Pictured
Not Pictured
PARTS PICTORIAL
1
MOUNTING & INSTALLATION
The Jackal is provided with a suction window mount.
Slide mount onto unit and push sideways to lock into place. Make sure you hear a click of the mount
locking into place.
Place in a convenient position on the windscreen and using the toggle lever pictured above (Item
2), push all the way to the bottom until lever locks into position.
Note: Monitor should be mounted in a clearly visible position in the cab for the operator, but not in
a position where it is subject to intense heat or moisture.
September 2015
REF PART NUMBER
1 A-Jackal
2 AH-407
3 P-321
4 AC-105
5 HM-506
AM-200
AM-Jackal
www.farmscanag.com
DESCRIPTION
Jackal Monitor
Mounting Bracket
11 Way Input Plug
Green & Grey
5m Power Cable
Screw Driver
Warranty Card
Manual
5
3
Installation
QTY
1
1
1 each colour
1
1
1
1
4
2
AM-JACKAL-3
3