Overview - FARMSCAN Jackal v2 General Description Manual

OVERVIEW

BUTTON FUNCTIONS
1
1. Power On/Off button
a. Power is turned on by a short press of the ON/OFF Button (1 second).
b. Power is turned off by two (2) short presses.
2. Run/Hold button
a. The RUN/HOLD button has a dual function.
a. Press RUN/HOLD once to place the 'MONITOR ON HOLD'.
b. Press RUN/HOLD again to resume operation.
b. The RUN/HOLD state is indicated in the top left hand corner of the screen. When the monitor is in
RUN mode, the unit displays RUN to signify that the monitor is active.
c. When the monitor is in HOLD mode the unit displays the word "HOLD"
3. Menu/Page button
a. The MENU/PAGE button is used for setting up the ports as well as returning to the main screen from
TRIPS or TOTAL displays
4. Select button (3 off)
a. The Jackal has 3 soft buttons placed directly under the LCD. These buttons will change function in
different menus.
b. The function of the soft button is indicated at the bottom of the screen directly above the button.
5. Navigation button (Up, Down, Left, Right, Enter)
a. The Round navigation (NAV) buttons are used to navigate UP/DOWN/LEFT/RIGHT in calibration screens.
b. ENTER is used to select the option highlighted onscreen.
September 2015
4
5
www.farmscanag.com
Overview 11
3
2
AM-JACKAL-3