Front Screen (Manual Setup) - FARMSCAN Jackal v2 General Description Manual

FRONT SCREEN (MANUAL SETUP)

When your inputs have been enabled and calibrated you can now choose to display them in any format on the front
screen. You can have up to 3 line items per page and viewable at all times. If more lines are added you can PAGE or
use the NAV buttons to scroll through each screen
Each input has the ability to display different values. You need to ensure the previous page (Inputs) are setup &
calibrated to continue with this method. It is recommended that the wizard be used to assist setup.
FRONT SCREEN > SETUP > FRONT SCREEN
Select the line you wish to display your information and
press EDIT
Assign the input to be displayed :
Input# : 1
Name : Wheel (Refer example to the Right)
Unit : km
Decimals : 1 ( decimal place when speed is viewed )
It is also possible to set Min & Max alarm points for that
input. (Refer to alarms)
September 2015
By scrolling down to NAME and pressing EDIT you can name
your port for easier identification on the front screen.
www.farmscanag.com
Front Screen (Manual Setup)
Enable the LINE by pressing EDIT
41
AM-JACKAL-3