Table of Contents
Advertisement
OVERVIEW
BUTTON FUNCTIONS
1
1. Power On/Off Key
a. Power is turned on by a short press of the ON/OFF Key (1 second).
b. Power is turned off by two (2) short presses.
2. Run/Hold Key
a. The RUN/HOLD key has a dual function.
b. Press RUN/HOLD once to place the 'MONITOR ON HOLD'.
c. Press RUN/HOLD again to resume operation.
d. The RUN/HOLD state is indicated in the top left hand corner of the screen. When the monitor is in
RUN mode, the unit displays RUN to signify that the monitor is active.
e. When the monitor is in HOLD mode the unit displays HOLD
3. Menu/Page Key
a. The MENU/PAGE key is used for setting up the ports as well as returning to the main screen from
TRIPS or TOTAL displays
4. Select Key (3 of)
a. The Jackal has 3 soft keys placed directly under the LCD. These keys will change function in different
menus.
b. The function of the soft key is indicated at the bottom of the screen directly above the button.
5. Navigation Keys (Up, Down, Left, Right, Enter)
a. The Round navigation (NAV) keys are used to navigate UP/DOWN & LEFT/RIGHT in calibration screens.
b. ENTER is used to activate the selection
AM-Jackal-2
4
5
more quick guides @ www.farmscanag.com/jackal
Overview
5
3
2
July 2013
Advertisement
Table of Contents
