Evco C-PRO CLIMA SYSTEMA Installer Manual page 69

Important parameters:
MCZN: Installer menu
MCZN: Installer menu
MCZN: Installer menu
MCZN: Installer menu
MCZN: Installer menu
MCZN: Installer menu
MCZN: Maintenance Menu
MCZN: Maintenance Menu
9.1.3 Zone work set-point (MCZN module)
The zone work set-point is decided depending on the work mode, manual or automatic (with
programmed weekly time bands), always using the Vgraph zone display.
For the types of work set-point acceptable and for their settings, consult the c-pro CLIMA system
user manual.
Other possibilities also exist to change the work set-point established via Vgraph in the modes listed
below:
9.1.3.1 Variation of the zone work set-point for "climatic curves" (MCZN, MCCT
modules)
By activating the work set-point variation function for "climatic curve", depending on the external
temperature it is possible (available on the MCCT regulator) to vary the active zone work set-point
value within the minimum and maximum limits that can be set from parameter, in order to adapt the
room temperature to the external climatic conditions, as follows:
-
set the minimum and maximum external temperature limits specific for summer functioning
and winter functioning, within which the variation function of the room set-point is active
-
the room work set-point minimum and maximum variation values are set
-
set the direction of the compensation if direct or inverse for increase or decrease
compensation of the work set-point.
Important parameters:
MCZN: Maintenance Menu
MCZN: Maintenance Menu
MCZN: Maintenance Menu
MCZN: Maintenance Menu
MCZN: Maintenance Menu
MCZN: Maintenance Menu
MCZN: Maintenance Menu
MCZN: Maintenance Menu
MCZN: Maintenance Menu
MCZN: Maintenance Menu
MCZN: Maintenance Menu
C-PRO CLIMA SISTEMA INSTALLER MANUAL
General parameters
Zones Zona A(B)
Zones Zone A(B)
Zones Zone A(B)
Zones Zone A(B)
Zones Zone A(B)
Zone A(B) Maintenance
Zone A(B) Maintenance
Zone A(B) Maintenance
Zone A(B) Maintenance
Zone A(B) Maintenance
Zone A(B) Maintenance
Zone A(B) Maintenance
Zone A(B) Maintenance
Zone A(B) Maintenance
Zone A(B) Maintenance
Zone A(B) Maintenance
Zone A(B) Maintenance
Zone A(B) Maintenance
Page 69
Local zones nr.
Delivery line
Terminal units
Sensor type
T. probe pos.
Reg. type
Regulation enablings
Temp. regulation
Regulation enabling
T.ext set variation
T.ext set variation
T.ext set variation
T.ext set variation
T.ext set variation
T.ext set variation
T.ext set variation
T.ext set variation
T.ext set variation
T.ext set variation
Temperature
Hysteresis
T. Ext set var.
MinTExt S
MaxTExt S
MinTExt Set S
MaxTExt Set S
ModeTExt Set S
MinTExt W
MaxTExt W
MinTExt Set W
MaxTExt Set W
ModeTExt Set W