Controls, Switches & Connectors - Yaesu FT-767GX Operating Manual

26 S U
23/22
(1) POWER
This button turns the transceiver on and off.
(2) MOX
(3) MIC Jack
2 19 18
(6) SQL o NB
The inner SQL (squelch) control sets the sig-
nal threshold level at which receiver audio is
The outer NB (Noise Blanker) control adjusts
the width of the blanking pulse when the noise
blanker is activated during reception. If set
very far clockwise receiver audio may be dis-
torted.
(7) AF o RF
The inner AF gain control adjusts the audio
volume of the receiver output in the speaker
or headphones.
The outer RF gain control adjusts the gain of
the receiver RF and IF amplifiers. This con-
trol is normally set fully clockwise for
maximum sensitivity. When rotated counter-
clockwise from maximum, the
meter minimum
le. The
peak deflection for a particular signal will
remain the same if it is greater than the
level set by this control, but the receiver
will be insensitive to weaker signals. This
control also affects the SQL setting, and
should be preset fully clockwise when setting
the squelch threshold.
deflection point will move up the