Table of Contents
Advertisement
CHAPTER ELEVEN
SETUPS – CREATE, STORE, EDIT, & RECALL
11.1 Introduction to Setups
Often times, users are faced with a variety of tasks and applications that are
sometimes similar, but often times very different. With a standard thickness gauge,
the user would have to recalibrate and setup for each individual application
respectively. The increased number of features and parameters also adds to the
overall setup time, or amount of time to set up marginal applications with perfection
and understanding. Because of the additional time involved, the MMX-7 has been
equipped with the ability to save these setups to memory and loaded at any time.
The MMX-7 can store up to 64 custom setups. These setups can be bi-directionally
transferred to and from a PC. Therefore, the user can save as many setups as
necessary for all their individual applications requirements. This saves a great deal
of time and knowledge for future inspections of the same job or project, eliminates
error between two or more users during the setup and calibration process.
11.2 Opening a Setup
The following procedures outline how to open factory and custom setups:
Open
84
Advertisement
Table of Contents
