Table of Contents
Advertisement
10) Press the UP or DOWN arrow key to highlight SAVE CHANGES, and the
OK key to activate the confirmation screen.
11) Press the OK key to save the changes or the ESC key to cancel editing the
file parameters.
12) Press the MEAS key to return to the measurement screen.
10.7 Changing the active File - Open
The user may have transferred grid templates from a PC to the MMX-7, or setup
grids using the MMX-7 at an earlier time. The name of the currently active file is
always displayed at the top of the Grid Box in measurement mode (refer to photo
below). It's not only important to recognize what file is currently active, but also be
able to change the active file at any time. The following procedures outline this
process:
MMX-7 A/B Scan Thickness Gauge
Active File
79
Advertisement
Table of Contents
