Storing A Reading - DAKOTA ULTRASONICS MMX-7 Operation Manual

10.3 Storing a reading

Now that a grid or sequential log has been created, it's time to make some
measurements and store the readings. The following procedures outline this
process:
Note: Once the gird has been created it will automatically be displayed
following the create confirmation screen. It is located at the bottom of the
measurement screen, and can be left open for the duration of the inspection
process. This section assumes the grid or sequential log was just created.
Refer to the section on "opening a grid or seq log" if the file was created at
another time.
Key Feature: When the
screen, pressing the OK key will initiate an advance to row number option. Use
the Left, Right, UP, and DOWN arrow keys to enter the row number. Once the
row number is correctly displayed, press the OK key to advance directly to that
row in the grid.
Key Feature: When the
screen, pressing the ESC key multiple times will toggle through the display
options: Digits, RF, RECT, and B-SCAN views.
Storing Data
MMX-7
is displaying a grid in the measurement
MMX-7
is displaying a grid in the measurement
71
MMX-7 A/B Scan Thickness Gauge