Table of Contents
Advertisement
Dakota Ultrasonics
VELOCITY: Function to calibrate the MMX-7 by setting the velocity to a known
material velocity. Refer to page 32 for further info.
3.4 DISP (display) – Menu
VIEW: Selectable BSCAN (cross section), and DIGITS (large digits) views. Refer to
page 42 for further info.
B-START: Provides the user the ability to change the start position of the B-SCAN
view. Adjusts the range of the scan bar in digits view. Refer to page 43 for further
info.
B-DEPTH: Provides the user the ability to change the overall depth of the viewable
measurement area. Adjusts the range of the scan bar in digits view. Refer to page
46 for further info.
B-SCAN SPEED: Controls the speed of the time based B-Scan with an arbitrary
scale of 0-10, with 10 being the fastest scrolling speed. Default speed set at 6.
Refer to page 46 for further info.
UNITS: Toggle between English or Metric units. The readout will change from
inches to millimeters (0.001" / 0.01mm).
BACKLIGHT: Selectable OFF, ON, AUTO, or INVERT backlight option.
CONTRAST: Adjustable display contrast for variable light conditions.
3.5 SETUP – Menu
OPEN: Displays a list of factory and user defined setups currently stored in memory.
These setups can be recalled and used at any time. Refer to page 84 for further info.
SAVE: Provides the user with the ability to save a custom setup that has been
modified or created by the user. Refer to page 86 for further info.
DELETE: Provides the user with the ability to delete specific setups previously save
in memory. Refer to page 90 for further info.
16
Advertisement
Table of Contents
