DAKOTA ULTRASONICS MMX-7 Operation Manual page 52

Data logging ultrasonic thickness gauge

Hide thumbs Also See for MMX-7:

Table of Contents

Dakota Ultrasonics

1) Press the MEAS key once to activate measure menu items. Press the

MEAS key multiple times to move right and the ESC key multiple times to

move left, until the B-ST cell is highlighted.

2) Press the UP, DOWN, LEFT, and RIGHT arrow keys to scroll the highlighted

value.

3) Alternatively, press the ENTER key to display the Digits Edit Box.

4) Press the UP and DOWN arrow keys to scroll the highlighted value.

5) Press the LEFT and RIGHT arrow keys to scroll the digit locations.

6) Repeat steps 4 & 5 until the B-ST value is correctly displayed.

7) Press the OK key to return to the measurement screen, or ESC to cancel

entering the B-ST.

8) Finally, repeat the steps above to adjust the B-Dep.

Adjusting the B-Scan Speed

B-Start

Table of Contents