DAKOTA ULTRASONICS MMX-7 Operation Manual page 60

Data logging ultrasonic thickness gauge

Hide thumbs Also See for MMX-7:

Table of Contents

Dakota Ultrasonics

1) Assuming the ALARM is ON, use the UP and DOWN arrow keys to scroll

through the sub menu items until ALARM LOW is highlighted.

2) Press the LEFT and RIGHT arrow keys to scroll the value. When the

correct alarm value is being displayed, proceed to step 7.

3) Alternatively, press the ENTER key to display the Digits Edit Box.

4) Press the UP and DOWN arrow keys to scroll the highlighted value.

5) Press the LEFT and RIGHT arrow keys to scroll the digit locations.

6) Repeat steps 4 & 5 until the ALARM LOW value is correctly displayed.

7) If only one limit will be used, press the MEAS key to return to the

measurement screen and begin taking readings. Otherwise, continue on to

set the ALARM HIGH limit using the same procedures.

Table of Contents