DAKOTA ULTRASONICS MMX-7 Operation Manual page 101

Data logging ultrasonic thickness gauge

Hide thumbs Also See for MMX-7:

Table of Contents

1) Press the MENU key once to activate the menu items tab. Press the MENU

key multiple times to tab right and the ESC key multiple times to tab left until

the XFER menu is highlighted and displaying the submenu items.

Alternatively, press the LEFT and RIGHT arrow keys multiple times using

the left button wheel.

2) Press the ENTER key to display the upgrade confirmation screen, followed

by pressing OK key to start the upgrade process.

Note: The

MMX-7

upgrade process.

Upgrading the Firmware

will power down and the alarm lights will flash during the

MMX-7 A/B Scan Thickness Gauge

Table of Contents