DAKOTA ULTRASONICS MMX-7 Operation Manual page 55

Data logging ultrasonic thickness gauge

Hide thumbs Also See for MMX-7:

Table of Contents

The procedures to adjust the Gain are outlined below:

1) Press the MEAS key once to activate measure menu items. Press the

MEAS key multiple times to move right, and the ESC key multiple times to

move left until the GAIN cell is highlighted.

2) Press the UP, DOWN, LEFT, and RIGHT arrow keys to scroll (vlow, low,

med, hi, vhi) in pulse-echo mode, or (low, med, hi) in echo-echo mode.

The user can also access and adjust the gain from the tabbed menus however this

method is more tedious than making the adjustments using the Hot Menus. The

procedure using the tabbed menus is outlined below:

1) Press the MENU key once to activate the menu items tab. Press the

MENU key multiple times to tab right, and the ESC key multiple times to tab

left, until the PRB menu is highlighted and displaying the submenu items.

Gain Adjust Hot Menu

Gain Adjust Tabbed Menus

MMX-7 A/B Scan Thickness Gauge

Table of Contents