DAKOTA ULTRASONICS MMX-7 Operation Manual page 13

Data logging ultrasonic thickness gauge

Hide thumbs Also See for MMX-7:

Table of Contents

4) Alternatively, press the MENU key once to activate the menu items tab.

Press the MENU key multiple times to tab right and the ESC key multiple

times to tab left until the PRB menu is highlighted and displaying the

submenu items.

5) Press the UP and DOWN arrow keys to scroll through the sub menu items

until ZERO PROBE is highlighted.

6) Press the ENTER key to display the confirmation screen.

7) Press the OK key to complete the probe zero process, or ESC key to cancel

zeroing.

8) Remove the transducer from the probe zero disk, and proceed to the

calibration section.

MMX-7 Ultrasonic Thickness Gauge

Table of Contents