DAKOTA ULTRASONICS MMX-7 Operation Manual page 37

Data logging ultrasonic thickness gauge

Hide thumbs Also See for MMX-7:

Table of Contents

2) With the "zero probe" hot menu cell highlighted by default, press the ENTER

key to display the confirmation screen, followed by pressing the OK key to

perform the zero.

Note: If the "zero probe" cell is not highlighted, press the MEAS or ESC keys

to highlight.

3) Alternatively, press the MENU key once to activate the menu items tab.

Press the MENU key multiple times to tab right and the ESC key multiple

times to tab left until the PRB menu is highlighted and displaying the

submenu items.

4) Press the UP and DOWN arrow keys to scroll through the sub menu items

until ZERO PROBE is highlighted.

5) Press the ENTER key to display the confirmation screen.

MMX-7 A/B Scan Thickness Gauge

Table of Contents