Table of Contents
Advertisement
Dakota Ultrasonics
1) Assuming DIFFERENTIAL has been enabled and a value is being displayed
to the right of the DIFFERENTIAL label, press the ENTER key to display the
Digits Edit Box.
2) Press the UP and DOWN arrow keys to scroll the highlighted value.
3) Press the LEFT and RIGHT arrow keys to scroll the digit locations.
4) Repeat steps 2 & 3 until the DIFFERENTIAL value is correctly displayed.
5) Press the OK key to set the DIFFERENTIAL value and return to the menu
screen.
6) Finally, press the MEAS key to return to the measurement screen and begin
taking readings.
9.4 Key Click
When a key is pressed on the MMX-7 keypad, the user can control whether or not an
audible beep is sounded and at what volume level, if any. The procedure for this
feature/preference is outlined below:
Setting the Key Click
56
Advertisement
Table of Contents
