Table of Contents
Advertisement
CHAPTER TWO
QUICK STARTUP GUIDE
Turn the MMX-7 on and off using the switch located on the bottom right corner of the
keypad. When MMX-7 is initially turned on, a flash logo and blinking lights will be
displayed prior to entering into the main measurement screen.
Note: This section is primarily written as a basic startup guide only.
2.1 MMX-7 Overview
In order to understand how to operate the MMX-7, it's best to start off with an
understanding of what it is we're looking at exactly. The MMX-7 has a lot of great
features and tools that will prove to be a huge benefit for the variety of applications
you're constantly facing on a continual basis. Let's have a brief look at the screens
you'll be looking at most often:
A. Repeatability/Stability Indicator – This indicator should be commonly used
in conjunction with the digital thickness values displayed. When all the vertical
bars are fully illuminated and the last digit on the digital thickness value is
stable, the MMX-7 is reliably measuring the same value 250 times per second
(250 Hz).
B. Battery Icon – Indicates the amount of battery life the MMX-7 has remaining.
C. Velocity – The material velocity value the MMX-7 is currently using or
calibrated for. Displayed in both English or Metric units, depending on what
units the gauge is set for.
2
Advertisement
Table of Contents
