Table of Contents
Advertisement
Dakota Ultrasonics
ALARM: Toggles alarm mode on, off, or audible. Refer to page 53 for further info.
ALARM HIGH: Gives the user the ability to set the HI limit parameter. If the
measurement exceeds this value, a red light will illuminate and sound the internal
beeper. Refer to page 53 for further info.
ALARM LOW: Gives the user the ability to set the LO limit parameter. If the
measurement falls below this value, a red light will illuminate and sound the internal
beeper. Refer to page 53 for further info.
DIFFERENTIAL: Gives the user the ability to set a nominal value and the MMX-7
will display +/- the difference from the nominal value entered. Refer to page 55 for
further info.
KEY CLICK: Give the user the ability to set the level of the key press beeper, OFF,
QUIET, or LOUD. Refer to page 56 for further info.
SET DATE: Gives the user the ability to set the internal date and time stamp in the
MMX-7. Refer to page 57 for further info.
SHOW DATE: Gives the user the ability to display the date and time in the waveform
area of the MMX-7. The options are OFF, DATE, TIME, BOTH. Refer to page 59 for
further info.
3.8 XFER (transfer) – Menu
UPGRADE GAUGE: Enables the user the ability to upgrade the MMX-7 to the most
current firmware revision. Latest version posted on www.dakotaultrasonics.com.
ABOUT: Provides the user with Dakota Ultrasonics contact information and the
MMX-7 firmware version. Refer to the Dakota Ultrasonics web site for information on
the latest firmware versions available for download.
3.9 CLR (clear) Key
The primary functions of the CLR key is to clear a measurement from a grid file cell
location, set an obstruct, or backspace in an Alpha Edit Box. If a user has already
saved a measurement and B-Scan to a cell location, use this key to clear the
measurement at any time.
3.10 MEAS (measurement mode) Key
The MEAS key returns the MMX-7 to the primary measurement screen/view. Press
at any time to view the main screen.
18
Advertisement
Table of Contents
