Backup Configuration To Pc; Restore Configuration To Panel; Backup Event Log To Pc - Siemens FC361 Series Technical Manual

Commissioning
9

Backup configuration to PC

9.7 Backup configuration to PC

9.8 Restore configuration to panel

9.9 Backup event log to PC

104 | 124
Building Technologies
Fire safety
1. Connect PC to the panel. Refer to chapter 'Connect PC to panel [➙ 95]'.
2. Open a web browser.
3. Enter web address with 'fc360.siemens.com' and press <enter>.
a 'FC360 Panel Configurator' is open.
4. Enter access level 3 password to login to level 3 on panel.
5. Click 'Backup'.
6. Enter a path and a file name and click 'OK'.
a A configuration backup is stored to the PC.
7. Disconnect PC from the panel.
1. Connect PC to the panel. Refer to chapter 'Connect PC to panel [➙ 95]'.
2. Open a web browser.
3. Enter web address with 'fc360.siemens.com' and press <enter>.
a 'FC360 Panel Configurator' is open.
4. Enter access level 3 password to login to level 3 on panel.
5. Click 'Restore'.
6. Select the configuration file and click 'OK'.
a The configuration is downloaded to the panel.
a 'FC360 Panel Configurator' logs out automatically.
7. Disconnect PC from the panel.
1. Connect PC to the panel. Refer to chapter 'Connect PC to panel [➙ 95]'.
2. Open a web browser.
3. Enter web address with 'fc360.siemens.com' and press <enter>.
a 'FC360 Panel Configurator' is open.
4. Click 'Administration' tab.
5. Click 'Event memory -Upload to PC'.
6. Enter a path and a file name and click 'OK'.
a The event log is stored to the PC.
7. Disconnect PC from the panel.
A6V10421795_en--_g
2016-11-18