Wiring On C-Net Devices - Siemens FC361 Series Technical Manual

Installation
5
C-NET detector line

5.6.3 Wiring on C-NET devices

36 | 124
Building Technologies
Fire safety
The connection terminals for the loop (detector line, C-NET) are on the main board.
The position is shown as below.
Figure 9: Position of C-NET detector line terminal
Each C-NET device has the terminals for directly connecting the C-NET wire.
Loop wiring
LOOP1
Connection terminal
Detector base and sounder base
● 1b (corresponds to +,
input/output)
● 5 (corresponds to input)
● 6 (corresponds to output)
Manual call point
Input/output modules
Zone module
Alarm sounder with supplementary
optical indication
A6V10421795_en--_g
2016-11-18