Aborting Plates/Stopping The System/Shutting The System Down; Aborting Plates/Stopping The System - Dynex Agility Automated ELISA System Operator's Manual

Chapter 4 Operating the Agility System
4.10 Aborting Plates/Stopping the System/Shutting the
System Down
4.10.1

Aborting Plates/Stopping the System

The sequence to Abort a Plate or Stop the System (Pause) is initiated by the
button which presents the Pause/Stop/Abort screen (Figure 4-32).
Figure 4-32: Pause/Stop/Abort Screen
The Plate Abort option stops the processing of current plate(s) that have
failed or all plates, depending on the user selection. All unused plates and SmartKits used for
to those plates will be returned to the loading bays. The system may not stop immediately.
Some actions being performed at the time may need to arrive at a state where the system can
be safely stopped before discontinuation. The plate may continue through the operation
sequence but no further samples will have been delivered to it subsequent to plate aborting.
Plate maps will be generated for aborted plates automatically. Plate maps will be located in a
time and date stamped subdirectory in the C:\Program Data\Dynex Technologies\Plate folder.
Agility System Operator's Manual
78