Dynex Agility Automated ELISA System Operator's Manual page 23

14. If Agility is used in an unspecified manner, the protection provided by the equipment may
be impaired.
15. Do not position Agility so that it is difficult to disconnect it from the power supply.
16. Do not use decontamination or cleaning agents that could cause a HAZARD as a result
of reaction with parts of the equipment or with material contained in it. 70% isopropyl or
ethyl alcohol as well as laboratory disinfectants containing quaternary ammonium
sulfates are approved for use to clean and disinfect Agility. Please contact your
instrument provider if there is any doubt about the compatibility of decontamination or
cleaning agents with Agility.
17. Agility is tested and compliant to IEC 61326-1:2006 standard for Electrical equipment for
measurement. Control and laboratory use with particular requirements for in-vitro
diagnostic devices.
18. All parts and accessories for Agility are required to be examined or supplied only by the
manufacturer or its designated agent.
19. This equipment has been designed and tested to FCC 15: Part B, ICES-003 for Class A
device. In a domestic environment it may cause radio interference, in which case you
may need to take measures to mitigate the interference.
Agility System Operator's Manual
Chapter 2 Safety
23