Plate Status Screen - Dynex Agility Automated ELISA System Operator's Manual

Chapter 6 The Graphical User Interface
6.6.2.3

Plate Status Screen

The Plate Status screen (Figure 6-12) indicates the type of samples on a given plate. In the
example shown, position A1 is a blank (gray), B1 a negative control (green), C1 through E1
are standards (blue), F1 is a positive control (red) and the rest are test samples (white).
Figure 6-12: Plate Status Screen
Each plate in the system can be accessed via a drop down menu adjacent to the Plate ID
information. If there are many plates, some plates may be beyond view. More plates may be
seen by clicking on the ▼ arrow scroll button.
Plate Maps can be printed from the Plate Status Screen by selecting the Printer icon in the
upper right corner of the screen (pictured above).
Agility System Operator's Manual
113