Dynex Agility Automated ELISA System Operator's Manual page 19

Click on Advanced.
Figure 1-16: Advanced Properties
If the COM port name is not assigned COM 1 to COM9, select a proper COM name
from "COM Port Number" list.
All USB hubs must have power management turned off. In Device Manager, select Universal
Serial Bus Controllers (Figure 1-17). Right click and select Properties on every Generic USB
Hub and every USB Root Hub. For each, got to the Power Management tab (Figure 1-18) and
unselect Allow the Computer to Turn off this device to save power.
Agility System Operator's Manual
Chapter 1 Overview
19