Analog Output Register Group; Table 3-8. Auxiliary Channel Assignments; Table 3-9. Channel Assignments - National Instruments PCI E Series Programmer's Manual

Chan<3..0>
0100
0000–0011
0101–1111
* The temperature sensor is not supported on Revision D and earlier of the PCI-MIO-16XE-50.
Chan<3..0>
xxxx

Analog Output Register Group

Note The analog output register group is not valid for the PCI-6023E, PCI-6032E and
PCI-6033E.
The four registers making up the Analog Output Register Group access the two analog output
channels, the analog output FIFO, and the analog output configuration. Data can be
transferred to the DACs in one of two ways. Data can be directly sent to the DACs from the
host computer, or buffered from the host by the DAC data FIFO.
© National Instruments Corporation

Table 3-8. Auxiliary Channel Assignments

Chan Type<2..0> = AUX
PGIA (+) PGIA (–)
TEMP AIGND
Reserved Reserved

Table 3-9. Channel Assignments

Chan Type<2..0> = GHOST
Used to preserve timing for multirate sampling. No
acquisition is performed for this scan entry.
3-15
Chapter 3 Register Map and Descriptions
Purpose
Onboard temperature sensor.*
+100 mV = -40° C, +1.75 V = +125° C
—
Purpose
PCI E Series RLPM