Recording And Playback Functions; D Recording Received Audio - Icom RS-BA1 Installation Manual

4
SETTINGS FOR A REMOTE STATION PC

■ Recording and playback functions

While connected to a radio, you can record the received audio and save it into the PC's hard disk using the Remote
station's Remote Utility.
Also, you can transmit an audio file to the radio using the Remote Utility.
The description in this section is based on the assumption that the connection to the radio has succeeded
("<<CONNECT>>" is displayed under the radio name).

D Recording received audio

Follow the steps below to record the received audio.
q In the Remote station's Remote Utility, open the
Radio List screen.
How to open: Select the 'Radio Operation' mode,
then click the [Radio List] tab.
w Select a radio with "
<<CONNECT>>
e Click [AF].
r Click [ ] to start recording.
• While recording, click [
t Click [ ] to stop recording.
NOTE:
• When you click [Folder Open], the folder in which
the recording file is stored will be displayed.
• If you want to change the recording folder, click
the [ ] button, then select a folder in the
Browse For Folder screen.
• Adjust the sample rate frequency and codec to
record the audio according to the recording pur-
pose. When you record the audio received from
the network, we recommend that you set the same
sample rate frequency and codec that are pro-
grammed in the Connection Setting screen.
" under its name.
] to pause.
w Select
Recording folder name
60
q Select
e Click
Record button
Stop button
Pause button
Open the folder
Recording file
name
Elapsed time
Folder browse button