Icom RS-BA1 Installation Manual page 5

Installtion guide A
Step2. Radio's presettings (Continued)
2. The following settings are automatically set to the radio
When the RS-BA1's Remote Controller connects to the radio, and you select the model name on the Connect Setting screen, the following
may be automatically set, depending on the model. When you manually operate the radio, set these items as desired.
Genre
Function MAIN/SUB Tranking function
RIT function
TX function
∂
SSB/CW Synchronous Tuning
Calibration Marker
VOX function
Scan function
RTTY filter
Twin Peak Filter
Display Dualwatch function
SUB band
Memory channel/Call channel
Operating ®
DR (D-STAR
mode
Satellite mode
CI-V
CI-V transceive
CI-V 731 Mode
* Operation on models without a USB connection cannot be guaranteed.
Item
IC-7850 (Firmware version 1.10 or later)/
IC-7851 (Firmware version 1.10 or later)
Radios with the Network function/
IC-7100 (Firmware version 1.10 or later)/
IC-7600 (Firmware version 2.00 or later)
Radios with the Network function/
IC-7600 (Firmware version 2.00 or later)
All
Radios with Calibration Marker function
All
All
IC-746PRO*/IC-756PROIII*/IC-7400*
IC-746PRO*/IC-756PROIII*/IC-7400*
Radios with the Dualwatch function
IC-9100
All
REPEATER) mode Radios with the DV mode
Radios with the Satellite mode
All
IC-746PRO*/IC-756PROIII*/IC-7400*
1.
Model
A-5
Step2. 3. 4.
Action
Automatically set to OFF.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to OFF.
Automatically cancel the scan.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to the VFO mode.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to ON.
Automatically set to OFF.
5.