When Connecting To The Network Through A Pc - Icom RS-BA1 Installation Manual

2

WHEN CONNECTING TO THE NETWORK THROUGH A PC

If you are using one of the following radios, skip this section and go to section 3. (p. 42)
• IC-7851
• IC-7850
• IC-7800 (Firmware version 3.00 or later)
• IC-7700 (Firmware version 2.00 or later)
When connecting to the network through a PC, read this instruction manual in the following order.
■ Connecting the radio to the Base station's PC
D Select the connection pattern
D When connecting to the
radio's [USB] port
(p. 17)
■ Radio's Presettings
■ When configuring the remote control system
through a LAN
D To let Remote sta-
tions access the
Server using its
computer name
(p. 23)
■ Network Setting
■ User Registration
■ Radio Registration
■ To monitor, or disconnect a Remote station
■ Connecting to a radio from the Server
D When connecting to the
radio's [REMOTE] jack
(p. 23 to 28)
D To let Remote sta-
tions access the
Server using its IP
address
(p. 25 to 28)
15
D When connecting to the
(p. 18)
■ When configuring the remote control system
through the Internet
D To let Remote sta-
tions access the
Server using its
public IP address
(p. 29)
(As of November 2016)
(p. 16)
(p. 16)
radio's [RS-232C] port
(p. 19)
(p. 21)
(p. 29 to 30)
D To let Remote sta-
tions access the
Server by its do-
main name
(p. 30)
(p. 31)
(p. 32)
(p. 33 to 37)
(p. 38)
(p. 40)