About This Instruction Manual - Icom RS-BA1 Installation Manual

ABOUT THIS INSTRUCTION MANUAL

To start using the RS-BA1, read this instruction manual in the following order.
ABOUT THE COMMUNICATION IN THE REMOTE CONTROL SYSTEM
1. BEFORE USING REMOTE CONTROL SYSTEM
When using a transceiver without the Server PC
function.
2. WHEN CONNECTING TO THE NETWORK
THROUGH A PC
4. SETTING FOR A REMOTE STATION PC
5. REMOTE CONTROLLER'S BASIC OPERATION
6. TROUBLESHOOTING
PREFACE
OVERVIEW OF THE RS-BA1
When using one of the following transceivers with
the Server PC function.
• IC-7851
• IC-7850
• IC-7800 (Firmware version 3.00 or later)
• IC-7700 (Firmware version 2.00 or later)
3. WHEN CONNECTING TO THE NETWORK
(p. 15 to 40)
ii
DIRECTLY
(p. i to iii)
(p. iv)
(p. v)
(p. 1 to 14)
(As of November 2016)
(p. 42 to 49)
(p. 50 to 60)
(p. 62 to 67)
(p. 68 to 74)