Radio Registration; D To Register A Radio - Icom RS-BA1 Installation Manual

2
WHEN CONNECTING TO THE NETWORK THROUGH A PC

■ Radio registration

In the Base station's Remote Utility, register the radios that are physically connected to your PC.
See page 16 to connect a radio to your PC.
• Radio Registration screen
DRadio's basic
information setting
(p. 34)
DRadio's Remote
station registration
(p. 35)
DAdjust limitation
setting
(p. 36)

D To register a radio

Procedure
Step 1:
Open the Radio Registration screen
Server Setting mode Radio List screen [Add]
Step 2:
Configure the radio's basic information
DRadio's basic information setting
Step 3:
Register remote stations to allow them to access
the radio
DRadio's Remote station registration
NOTE:
To remove a radio from the Radio List screen, select
it in the list, and then click [Remove].
(p. 34)
(p. 35)
33
Step 4:
Limit the maximum level of the Remote station's audio
quality adjustment
DAdjust limitation setting
(p. 36)
Step 5:
Set the COM port and audio devices
DCOM port and audio device setting
Step 6:
Save the settings
Radio Registration screen [OK]
DCOM port and audio
device setting
(p. 37)
(p. 37)