When Configuring The Remote Control System Through The Internet; D To Let Remote Stations Access The Server Using Its Public Ip Address - Icom RS-BA1 Installation Manual

2
WHEN CONNECTING TO THE NETWORK THROUGH A PC

■ When configuring the remote control system through the Internet

If you configure the remote control system through the Internet, Remote stations can access the Server using its
public IP address. If you utilize a Dynamic DNS service, Remote stations can access the Server by not only its
public IP address, but also by its domain name.

D To let Remote stations access the Server using its public IP address

A public IP address is an address that is accessible over the global Internet. If you use a dynamic public IP address,
it is chosen from a pool of available addresses and changes each time you connect to the Internet. Because of this,
Remote stations will have to match the IP address each time to access the Server.
If you use a dynamic public IP address, we recommend that you utilize the Dynamic DNS service to allow the Re-
mote stations to access the Server using its domain name, or use a static public IP address.
Ask the router's manufacturer about how to configure your router to set the public IP address.
IP address
WAN: 888.888.888.888
LAN: 192.168.0.1
Base station
Icom radio
Router
(Server)
IP address: 192.168.0.100
Computer name: Base PC
Internet Internet
PC
29
Router
Remote station
PC
Request "888.888.888.888"
(Public IP address)