D Network Audio Quality Setting - Icom RS-BA1 Installation Manual

4
SETTINGS FOR A REMOTE STATION PC
■ Connecting to a radio (Continued)

D Network audio quality setting

q In the Remote station's Remote Utility, open the
Radio List screen.
How to open: Select the 'Radio Operation' mode,
then click the [Radio List] tab.
w Select a radio.
e Click [Settings] to display the Network Setting
screen.
r Click [Recommended].
t The Select Network screen appears.
Select the connection to a radio either through a
LAN, or the Internet, and then click [Next].
y The recommended values for your network are
displayed. Click [Yes] to automatically set the dis-
played values in each field of the Network Setting,
then close the Select Network screen.
u Click [Save] in the Connection Setting screen to
save the settings, and close the screen.
• To use the IF signal for receiving, set "Sample Rates" to
48 kHz.
w Select
e Click
Select
q
55
q Select
Click
Click
w
Click