D The Following Settings Are Automatically Set To The Radio - Icom RS-BA1 Installation Manual

2
WHEN CONNECTING TO THE NETWORK THROUGH A PC
■ Radio's presettings (Continued)

D The following settings are automatically set to the radio

When the RS-BA1's Remote Controller connects to the radio, and you select the model name on the Connect Set-
ting screen, the following may be automatically set, depending on the model. When you manually operate the radio,
set these items as desired.
Genre
Function MAIN/SUB Tranking function IC-7850 (Firmware version 1.10 or later)/
RIT function
TX function
∂
SSB/CW Synchronous
Tuning
Calibration Marker
VOX function
Scan function
RTTY filter
Twin Peak Filter
Display
Dualwatch function
SUB band
Memor y channel/Call
channel
Operating
DR (D-STAR
mode mode
Satellite mode
CI-V
CI-V transceive
CI-V 731 Mode
* Operation on models without a USB connection cannot be guaranteed.
Item
IC-7851 (Firmware version 1.10 or later)
Radios with the Network function/
IC-7100 (Firmware version 1.10 or later)/
IC-7600 (Firmware version 2.00 or later)
Radios with the Network function/
IC-7600 (Firmware version 2.00 or later)
All
Radios with Calibration Marker function Automatically set to OFF.
All
All
IC-746PRO*/IC-756PROIII*/IC-7400*
IC-746PRO*/IC-756PROIII*/IC-7400*
Radios with the Dualwatch function
IC-9100
All
® REPEATER) Radios with the DV mode
Radios with the Satellite mode
All
IC-746PRO*/IC-756PROIII*/IC-7400*
Model
22
Action
Automatically set to OFF.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to OFF.
Automatically cancel the scan.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to the VFO
mode.
Automatically set to OFF.
Automatically set to OFF.
Automatically set to ON.
Automatically set to OFF.