When Connecting To The Network Directly; Ic-7800 (Firmware Version 3.00 Or Later); Ic-7700 (Firmware Version 2.00 Or Later) - Icom RS-BA1 Installation Manual

3

WHEN CONNECTING TO THE NETWORK DIRECTLY

The settings in this section are necessary only when using one of the following radios.
• IC-7851
• IC-7850

• IC-7800 (Firmware version 3.00 or later)

• IC-7700 (Firmware version 2.00 or later)

If you use other Icom radio, skip this section and go to section 4. (p. 33)
When connecting to the network directly, read this instruction manual in the following order.
■ Radio's Presettings
■ When configuring the remote control system
through a LAN
D To let Remote sta-
tions access the
Server using its IP
address.
(p. 44)
■ Network Setting
■ User Registration
■ Radio Registration
(p. 44)
D To let Remote sta-
tions access the
Server using its
network name
(p. 44)
42
■ When configuring the remote control system
through the Internet
D To let Remote sta-
tions access the
Server using its
public IP address
(p. 45)
(As of November 2016)
(p. 43)
(p. 45)
D To let Remote sta-
tions access the
Server by its do-
main name
(p. 45)
(p. 46)
(p. 47)
(p. 48 to 49)