Setup With Keypad - Paytec Eagle User Manual

SETUP with keypad

How to access SETUP menu: press Escrow lever and keep it pressed while pressing B. When the message
"SETUP" is displayed, release the lever (Fig.10).
Fig.10
Function list
Set max. level coins in each tube. TA = tube A, TB = tube B, ....
TubeM
Press F to enter, C to scroll the tube list, B/E to modify settings.
Press C to confirm and go to the next tube.
Set list with 10 prices.
Price
Press F to enter, C to scroll down prices, B/E to modify prices, F to confirm.
Set list with 10 discounts, 1 for each price (or 100 discounts, 1 for each price)
Disc.
Press F to enter, C to scroll prices, B/E to modify data, F to confirm.
Set coin destination. Coins are indicated by their channel number (Ch1, Ch2, Ch3 .... ). It is
Dest.
necessary to know the channel number of a coin before proceeding.
Clear errors (press F to clear errors).
ErClr
"max-FILL" value. This is the max. number of coins a tube can contain when manually filling
tubes ("FILL" mode – see Fn09).
TubeF
When setting on "0" (zero) the parameter is ignored. In this case, the max. number of coins a
tube can contain is the value in "TubeM".
Press F to enter; "FA ..." is displayed (which means "max-FILL" for tube A); press B/E to modify
a value; press A/C to scroll the tube list and save the new setting. Press D to go back to the
menu (ESC).
Notice: up to firmware rev.2.00, the function "TubeL" makes it possible to read the coins in each tube. From firmware rev.3.00,
you can read this value by simply pressing the button of the tube you wish to read.
READING CREDIT IN TUBES
Press Escrow lever and D together to read the total credit in the tubes (the value is displayed on LCD).
Press Escrow lever
...
SETUP
... and B
74
Keypad
E Scroll functions.
F Read/edit parameters in a function.
C Scroll down a list.
A Scroll back a list.
D Exit a function.
Press B (reduce) or E (increase) to modify the
value of a parameter.