Functions P6000 - Paytec Eagle User Manual

Functions P6000

The functions here below are valid when configuring the system with the programming tool P6000 or with the APP
PayTools on a Smartphone.
00 General parameters
This function contains the main parameters: protocols, max. credit cash/on key, bill validator type, system
date/time, machine number, currency (Euro / NCU), P6000 access password ...
01 Parameters change - USF
Enter the smallest credit unit (Euro = 001) and adjust changegiving parameters
03 Coin values
This function enables operators to read/modify configuration for each coin channel, select coin destination
(tube/cashbox), adjust inhibit parameters ...
04 Prices and discounts
Enter prices and discounts.
05 Bill values
Enter the value of the bills accepted by the bill validator connected (if any)
06 Cashless parameters
Enter PINs for keys and other checking parameters on key.
Recycling option. Set parameters for auto-programming keys.
07 Time bands
The following timed functions are available : 4 timed ON/OFF, 2 time bands for discounts, 2 time bands for free
vends, 1 time band for free credit. Option for passage to summer time.
08 Coins Programming
This function is used to configure coin channels.
09 Level in tubes
Adjust coin level in tubes: empty and maximum; number of coins in each tube
10 Security
Secure mode can be activated here: PINs on keys are only programmed by inserting an Access Key (PINs can
be no longer modified with Paytec Configurator / P6000 - unless the system is reset).
11 Fidelity
Clients can be fidelized by giving them credit/points for each purchase.
12 Audit (password required)
This function enables operators to activate/read extended Audit, activate Audit reset key, read how many readouts
so far, modify Audit password and reset Audit.
13 Credit cash overpayment
You can decide whether residual cash credit must be displayed for 3 mins or not (when lower than the lowest
price).
15 Miscellaneous options
This function contains an option preventing users to recharge keys with cash. Other options: Exact-Change signal
OFF, price increase with cash, timeout cash OFF, free vends only with key, setup from keypad.
16 Set level in tubes
Servicing function to modify the number of coins in each tube
.
.
.
21
.