Fn03 - Coin Parameters - Paytec Eagle User Manual

Fn03 – Coin parameters
Parameters can be read in Fn03 for each coin (up to 30 coin channels).
Some parameters can also be modified.
Select a channel, then press
Press ESC to exit a function.
Adjust coin parameters with the utmost care; an incorrect setting might prejudice coin discrimination level.
Select
coin No.
Coin No.
Euro ?
1^ Coin
value:
List coin
options 1 ?
Coin No.
inhibited ?
Coin No.
Coin Protected
Coin No.
Black Coin ?
Coin No.
Tube 1 ?
Coin No.
Tube 2 ?
Coin No.
Tube ... ?
Coin No.
Tube 6 ?
to scroll down the list of parameters.
Enter the number of a coin channel, then press
1
N The tube selected contains other coins than Euro.
1 Y The tube selected contains Euro coins.
Euro coins are accepted by "currency description = 978" in Fn00.
Coin value (65500 max.)
Enter coin value, then press
This value must be equal to the USF in Fn01 (or a multiple of it).
st
N The 1 coin parameter is displayed.
Y Scroll down the list of coin options.
N The coin is accepted.
1
Y The coin is NOT accepted (channel inhibited).
DO NOT MODIFY THIS PARAMETER
1
This channel is protected against writing (only-read parameters).
Y
Such channel can be inhibited but not modified.
N The coin is always accepted.
1
Y Black Coin channel (the coin is NOT accepted).
Standard setting : "N"
Coin destination
1
N The coin does not fall in tube 1.
Y The coin falls in tube 1 (tube A).
1
Do the same for each of the six tubes.
→ If you leave N for all the tubes, the coins fall in the cashbox.
1
→ When the destination tube is full, the coin falls in the cashbox.
→ A coin can be routed to different tubes (check compatibility in
1
diameter).
to confirm.
30
to confirm.