Fn16 - Set Level In Tubes; Fn17 - Price-Holding Setting - Paytec Eagle User Manual

Fn16 – Set level in tubes
The number of coins in each tube can be modified/reset in this function.
The number displayed must be the number of coins actually in the tubes.
WARNING. An incorrect setting might cause the system to payout fewer coins than due or might cause the tubes
being overfilled.
Select
tube No.
Fn17 – Price-Holding setting
PRICE HOLDING - LIST 10 PRICES
This function must be configured together with Fn04 to associate prices/selection numbers when EAGLE is
working in Executive Price Holding mode with a 10-price list.
See Fn00 and Fn04 for more info on Price Holding mode.
You don't have to configure Fn17 when a list 100 prices has been selected in Fn19; in this case, prices and
selection numbers are linked as follows: selection no.1-price no.1, selection no.2-price no.2,... selection no.100-
price no.100).
Selection
Number (1-64)
1^ Selection
Price line 5
Select a tube (No.1 = tube A; No.2 = tube B ...), then press
The number of coins in the tube is displayed. Enter the correct number
1
and press
Enter the selection number (1 to 64) you wish to link with a price number (e.g.
1
selection no.1).
Enter the price number you wish to link with a selection number (e.g. price no.5).
... do the same for all the associations selection/price you wish to make...
to continue.
52
to confirm.