Connecting A Local Key Reader - Paytec Eagle User Manual

Connecting a local Key reader

Reader CAIMAN PIT or MIFARE
A CAIMAN reader (either PIT or MF) can be connected to EAGLE.
All the options in EAGLE dedicated to the use of keys/cards described in this document are valid when using
keys/cards with a local Paytec reader.
The reader CAIMAN PIT enables payments with a Paytec PIT Key (Transponder RF 125KHz).
The reader CAIMAN MIFARE
The reader must be plugged on connectors J9 and J10 on the back of the selector.
The connecting cable, which is different for PIT and MF readers, is supplied with the reader itself
MDB
master
EXE
LED on the key reader faceplate
OFF
Flashing green every 5 secs.
Green ON
Red ON
Yellow ON
Flashing yellow + Err 2
®
(MF).
®
enables payments with a Paytec MF key/card (RF 13.56MHz).
J2 J3 J4
J9
MF KEY
Reader OFF.
Reader ON ... ready for use.
The key can be pulled out.
Writing ... (don't pull out the key).
• Key error.
• System ON with key sensor dulled.
Extended Audit full.
READER CABLE
J10
MF CARD
12
CAIMAN PIT
LED
PIT KEY
CAIMAN MIFARE
IrDA
®