Key Format - Paytec Eagle User Manual

Key format

Keys can be configured in two different formats: key1 or key98.
Select key format in Fn06. When the key format selected is different from the format of keys circulating in a
location, keys are not accepted (the error message CAR 10 is displayed).
Here below are details about the two key formats.
Credit
Date
Free credit
Free vends
Special discounts
Currency
Currency format
Keys can be formatted either with NCU or Euro credit.
Euro-configured systems (currency description = 978 - Fn 00): credit on noEuro keys is automatically converted
in Euro when inserting the key in the reader (conversion following the change rate in Fn38).
LEDs (on key reader faceplate)
LEDs on Paytec key reader faceplate.
OFF
Flashing green every 5 secs.
Green ON
Red ON
Yellow ON
Flashing yellow + Err 2
Key 1
One credit memory.
Free credit is either added to or
deducted from credit on the key.
Either day or month is written on keys,
depending on the free credit selected
(daily or monthly free credit).
Daily / monthly / up to 4 levels.
All the systems in a location must
contain the same configuration.
Daily / monthly / up to 4 levels.
Daily / monthly.
Type 1, Euro 1.
Reader OFF.
Reader ON ... ready for use.
Key inserted and accepted (you can pull out the key).
Writing ... (don't pull out the key).
- Key error.
- System ON with sensor dulled.
Extended Audit full.
Two credit memories.
Cash credit and free credit are stored in
two separate memories. Cash credit is
only used when no more free credit is
left.
Date is always written in full
(dd/mm/yy), that enables operators to
optimize the use of periodical bonuses.
Daily/monthly/periodical/up to 4 levels.
The systems in a location can be
differently configured.
Daily/monthly/periodical/up to 4 levels.
Daily/monthly/periodical/up to 4 levels.
Type 98, Euro 98.
37
Key 98