Paytec Eagle User Manual page 34

Executive Price Holding - List 10 prices
Prices are controlled by the changegiver EAGLE. In this case, each price (with its discount) is associated with a
selection number.
You can have different selection numbers with the same price but different discounts.
Settings are indicated in table 1.
" Executive Protocol ? "
Fn00 " Price Holding mode ? "
" Send price to VMC ? "
Fn01 " Unit Scaling Factor "
" 1^ Price value: - - - - - "
Fn04
" 1^ Pr./Disc. 1 value: - - - - - "
" Selection number
(1 – 64)
Fn17
" 1^ Selection
price line no. - - "
∗
Send price to VMC – Enter "Y" to display prices when a pressing a selection button but no money has
been inserted yet. Prices can be thus checked on display before a purchase is made.
Executive Price Holding - List 100 prices
Up to 100 prices (extended memory). This option is useful for those VMs with a high number of selections.
All 100 prices are set in Fn04 (price number = selection number) and you don't have to set parameters in Fn17.
In this case one discount is only given for each price.
Settings are indicated in table 2.
Fn00 - Fn01 See table 1
" 100 selections ? "
Fn19 " Reset prices and discounts? "
" Confirm reset ? "
" 1^ Price value: - - - - - "
Fn04
" 1^ Pr./Disc. 1 value:
Audit is extended to 100 prices.
Y
Y
Y/N
001
1 "
Y
Y
Y
"
34
Executive protocol enabled.
Price Holding mode enabled.
∗
( See below )
Enter 1 (up to 64 selections available).
Enter up to 10 prices (match each price to a
selection).
Enter up to 4 discounts for each price
(depending on the key type in use).
Enter selection no. on the VM (64 selections
max.)
Enter the price number (1 to 10) you wish to
associate with a selection number.
Set as indicated in table 1
List 100 prices enabled.
The current List 10 prices is reset.
Reset is confirmed.
Enter up to 100 prices.
Enter a discount for each price.
Table 1
Table 2